Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Dial MIBs and OIDs Used in the Case Study
"
Basic Dial NMS Implementation Guide
List of user CLIDs cpmActiveRemotePhoneNumber
.1.3.6.1.4.1.9.10.19.1.3.1.1.2
show caller ip
show isdn history
List of called DNIS phone numbers cpmActiveLocalPhoneNumber
.1.3.6.1.4.1.9.10.19.1.3.1.1.13
show caller ip
List of TTY interfaces in use cpmActiveTTYNumber
.1.3.6.1.4.1.9.10.19.1.3.1.1.14
show caller ip
List of which user is using which
modem slot
cpmActiveModemSlot
.1.3.6.1.4.1.9.10.19.1.3.1.1.6
show caller user
List of which user is using which
modem port
cpmActiveModemPort
.1.3.6.1.4.1.9.10.19.1.3.1.1.7
show caller user
List of which IP addresses are
currently in use
cpmActiveUserIpAddr
.1.3.6.1.4.1.9.10.19.1.3.1.1.4
show caller ip
Table 12 Description of CISCO-MODEM-MGMT-MIB (continued)
Variable Description OID
Equivalent Cisco IOS
Command