Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 8Using CiscoWorks 2000 Resource Manager Essentials
About CiscoWorks 2000 RME
"
Basic Dial NMS Implementation Guide
Using CiscoView
CiscoView is a GUI-based device management software application that lets you access dynamic status,
statistics, and comprehensive configuration information for Cisco products.
To inspect device-specific characteristics on different Cisco devices, follow these steps:
Step 1
From the top-level map in HPOV, select a device.
Step 2
Go to
Monitor
:
CiscoView
.
Step 3
Select and view different system components.
Figure 38 Card Positions in the Cisco AS5800 Dial Shelf