Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 8Using CiscoWorks 2000 Resource Manager Essentials
About CiscoWorks 2000 RME
Basic Dial NMS Implementation Guide
Step 4
Select
All
in the Views window.
Figure 36 Devices Listed in the Availability Monitor
Step 5
Select one or more devices.
Step 6
Click
Finish
.
Step 7
Inspect the available elements for the devices.
38630