Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 8Using CiscoWorks 2000 Resource Manager Essentials
About CiscoWorks 2000 RME
'
Basic Dial NMS Implementation Guide
Step 6
In the Import from Local NMS screen:
Select
HP Openview
from the NM Product rectangular-shaped menu.
Choose
Resolve conflicts after importing
.
Choose
Cisco devices only
.
The SNMP community strings are automatically set during the import operation.
Figure 33 Devices Imported from HP OpenView
Step 7
Click
Next
.
The devices are imported and a status summary appears.
Step 8
Click
Update
until you see all the devices classified as managed devices.
A constant pending or conflicting state indicates a problem that requires resolution:
Inspect the details of the device.
Verify that the SNMP community strings are correct.
38628