User's Manual

13-5
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 13 Managing Cisco CSR 1000V Licenses
Managing Technology Package and Throughput Licenses
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
show platform hardware throughput level
Example:
Router# show platform hardware throughput level
The current throughput level is 50000 kb/s
Displays the current maximum hardware throughput
level.
Verify the current settings.
Step 3
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 4
Cisco IOS XE Release 3.10S and later:
platform hardware throughput level MB
{10 | 100 | 1000 | 250 | 2500 | 50 | 500 | 5000}
Cisco IOS XE Release 3.9S:
platform hardware throughput level
{10000 | 25000 | 50000 | eval-only}
Example:
Router(config)# platform hardware throughput level
500
Changes the maximum throughput level for the
Cisco CSR 1000V. The available throughput options
varies depending on the release version.
Note In Cisco IOS XE Release 3.9S, the
throughput level values are expressed in
Kbps. If you select eval-only, the system
will check only the evaluation license.
Step 5
exit
Example:
Router(config)# exit
Exits configuration mode.
Step 6
show platform hardware throughput level
Example:
Router# show platform hardware throughput level
The current throughput level is 50000 kb/s
Displays the current maximum hardware throughput
level.
Verify that the maximum throughput level has been
updated.