User's Manual

12-36
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
Configuring Diagnostic Signatures
What to Do Next
Set the profile configured in the previous procedure as the DS profile and configure other DS parameters.
Configuring Diagnostic Signatures
Before You Begin
Configure the Call Home feature to set attributes for the Call Home profile. You can either use the default
CiscoTAC-1 profile or use the newly-created user profile.
SUMMARY STEPS
1. call-home
2. diagnostic-signature
3. profile ds-profile-name
4. environment ds_env-var-name ds-env-var-value
5. end
6. call-home diagnostic-signature {{deinstall | download} {ds-id | all} | install ds-id}
7. show call-home diagnostic-signature [ds-id [actions | events | prerequisite | prompt | variables]
| failure | statistics [download]]
DETAILED STEPS
Step 9
subscribe-to-alert-group inventory [periodic {daily
hh:mm | monthly day hh:mm | weekly day hh:mm}]
Example:
Router(cfg-call-home-profile)#
subscribe-to-alert-group inventory periodic
daily 14:30
Configures a destination profile to send messages for the
Inventory alert group for Call Home.
• This command is used only for the periodic
downloading of DS files.
Step 10
exit
Example:
Router(cfg-call-home-profile)# exit
Exits call-home profile configuration mode and returns to
call-home configuration mode.
Command or Action Purpose
Command or Action Purpose
Step 1
call-home
Example:
Router(config)# call-home
Enters call-home configuration mode for the configuration
of Call Home settings.
Step 2
diagnostic-signature
Example:
Router(cfg-call-home)# diagnostic-signature
Enters call-home diagnostic signature mode.