User's Manual

12-25
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Sending Call Home Communications Manually
You can manually send several types of Call Home communications. To send Call Home
communications, perform the tasks in this section. This section contains the following subsections:
• Sending a Call Home Test Message Manually, page 12-25
• Sending Call Home Alert Group Messages Manually, page 12-26
• Submitting Call Home Analysis and Report Requests, page 12-27
• Manually Sending Command Output Message for One Command or a Command List, page 12-28
Sending a Call Home Test Message Manually
You can use the call-home test command to send a user-defined Call Home test message.
To manually send a Call Home test message, perform the following step:
SUMMARY STEPS
1. call-home test [“test-message”] profile name
DETAILED STEPS
Command or Action Purpose
Step 1
call-home test [“test-message”] profile name
Example:
Router# call-home test profile profile1
Sends a test message to the specified destination profile.
The user-defined test message text is optional but must be
enclosed in quotes (“”) if it contains spaces. If no
user-defined message is configured, a default message is
sent.