User's Manual

12-12
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Setting Profiles to Anonymous Mode
To set an anonymous profile, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. profile name
4. anonymous-reporting-only
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters Call Home configuration submode.
Step 3
profile name
Example:
Router(cfg-call-home) profile CiscoTAC-1
Enables profile configuration mode.
Step 4
anonymous-reporting-only
Example:
Router(cfg-call-home-profile)#
anonymous-reporting-only
Sets the profile to anonymous mode.
Note By default, the profile sends a full report of all types
of events subscribed in the profile. When
anonymous-reporting-only is set, only crash,
inventory, and test messages are sent.