Network Router User Manual

5-3
Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide
OL-8179-02
Chapter 5 Cleaning the OIM HBMT Connectors
How to Clean the OIM HBMT Connectors
Figure 5-2 Cleaning the OIM HBMT Connectors
To clean the OIM HBMT connectors, follow these steps:
Step 1 Attach an ESD-preventive wrist strap to your wrist and connect its leash to an ESD connection socket
or a bare metal surface on the chassis.
Step 2 Insert the OIM HBMT adapter into an OIM HBMT connector. Verify that the connector shutters open
fully when you insert the adapter (see Figure 5-3).
1 Cleaning tool 3 OIM HBMT connector
2 OIM HBMT adapter 4 OIM
158109
3
4
1
2