Network Router User Manual

CHAPTER
4-1
Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide
OL-8179-02
4
Cleaning the S2 HBMT Connectors
This chapter provides instructions for cleaning the high-density backplane-mounted (HBMT) connectors
on the rear of the S2 cards in the fabric card chassis.
This chapter presents the following topics:
• Information About Cleaning the S2 HBMT Connectors
• Cleaning the S2 HBMT Connectors
Information About Cleaning the S2 HBMT Connectors
In the fabric card chassis (FCC), the S2 and OIMs connect to each other using HBMT connectors on the
back of each card. Use the S2 HBMT adapter (see Figure 4-1) to clean these connectors.
Figure 4-1 S2 HBMT Adapter
158207