Manualshelf

Network Router User Manual

ManualsBrandsCisco Systems ManualsNetwork RouterCRS-1
21222324252627282930
CHAPTER
3-1
Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide
OL-8179-02
3
Cleaning the Bulkhead Array Connectors
This chapter provides instructions for cleaning the optical array connectors located on the S13 cards in
the line card chassis (LCC) to the optical interface modules (OIMs) in the fabric card chassis.
This chapter presents the following topics:
• Information About Cleaning the Bulkead Array Connectors
• How to Clean the Bulkhead Array Connectors
Information About Cleaning the Bulkead Array Connectors
This chapter describes how to clean the S13 array connectors. The bulkhead array connectors are located
on the S13 fabric cards in the LCC and on the OIMs in the FCC. Use the OIM/S13 array adapter (see
Figure 3-1) to clean these connectors. This adapter is the same one used to clean the optical array cables.
Figure 3-1 OIM/S13 Array Adapter
158206