Craft Works Interface Quick Start Guide

Figure 7 Login Script Steps Window

The exact inputs depend on the intermediate server that is being used. If you are connecting to the intermediate machine by

using SSHv1 or SSHv2, you do not need to specify steps for sending the username and password to the intermediate machine,

because this is done when establishing a connection.

Table 6 lists the steps that you can enter for a Telnet connection to the intermediate server with a Telnet connection from the

server to the device.

Table 7 lists the steps that you can enter for a SSH connection.

Depending on where you launched the Login Script Steps window, click OK to go back to the CWI - Login window or the Add

Device window.

Closing CWI

To close CWI, perform the following steps:

Step 1 Choose File> Exit. Or click the Close button on the CWI Desktop title bar.

A Craft Works Interface dialog box appears.

Step 2 Click Yes to exit the application.

The CWI Desktop window closes.

Ta b l e 6 Te l n e t E x a m p l e

Wait For Send

Password Scripted Password

<router prompt> telnet <router IP address>

Table 7 SSH Example

Wait For Send

Password Scripted Password

<router prompt> ssh -1 %USERNAME% <router IP address>