User manual
Table Of Contents
- Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
- Contents
- Preface
- Overview
- Installing the Access Point
- Safety Information
- Warnings
- Unpacking the Access Point
- Basic Installation Guidelines
- Controller Discovery Process for Lightweight Access Points
- Deploying the Access Points on the Wireless Network
- Opening the Access Point Cover
- Mounting the Access Point on a Horizontal Surface
- Mounting the Access Point Below a Suspended Ceiling
- Mounting the Access Point Above a Suspended Ceiling
- Mounting Access Point on a Network Cable Box
- Mounting Access Point on a Desktop or Shelf
- Attaching the Access Point to the Mounting Plate
- Securing the Access Point
- Connecting the Ethernet and Power Cables
- Rotating the Cisco Logo
- Troubleshooting Autonomous Access Points
- Checking the Autonomous Access Point LEDs
- Checking Basic Settings
- Low Power Condition for Autonomous Access Points
- Running the Carrier Busy Test
- Running the Ping Test
- Resetting to the Default Configuration
- Reloading the Access Point Image
- Obtaining the Access Point Image File
- Connecting to the Access Point Console Port
- Obtaining the TFTP Server Software
- Troubleshooting Lightweight Access Points
- Guidelines for Using 1130AG Series Lightweight Access Points
- Checking the Lightweight Access Point LEDs
- Low Power Condition for Lightweight Access Points
- Manually Configuring Controller Information Using the Access Point CLI
- Returning the Access Point to Autonomous Mode
- Obtaining the Autonomous Access Point Image File
- Connecting to the Access Point Console Port
- Obtaining the TFTP Server Software
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- VCCI Statement for Japan
- Industry Canada
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Aironet Access Points in Japan
- Administrative Rules for Cisco Aironet Access Points in Taiwan
- Declaration of Conformity Statements
- Access Point Specifications
- Channels and Maximum Power Levels
- Console Cable Pinouts
- Priming Lightweight Access Points Prior to Deployment
- Configuring DHCP Option 43 for Lightweight Access Points
- Glossary
- Index
IN-1
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
OL-8369-05
INDEX
A
access point image 3-17
antenna connectors C-2
B
basic settings, checking 3-4
bridge configuration 1-1
C
configuring DHCP Option 43 G-2
connectors C-1, C-2
console port E-2
terminal emulator settings 3-21, 4-12
controller discovery process 2-4
D
data rates C-2
declarations of conformity B-1
default, configuration, resetting 3-15
deployment
access points 2-5
process 2-5
DHCP Option 43 4-2, G-1
DHCP pool G-2
discovery process
DHCP server 2-4
DNS server 2-4
locally stored 2-4
E
extended temperature range 2-3, 2-4
F
FCC Declaration of Conformity B-2
FCC Safety Compliance 2-2
frequency range C-2
G
guidlines, installation 2-4
I
indicators 3-2, 4-2
input power C-1
installation guidelines 2-4
K
key features 1-3
M
MAC information 2-5
Mode button 3-17
modulation C-2
O
operating temperature C-1