Network Router User Manual

2-27
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 2 Fault Descriptions
Switch Faults
Switch Port bandwidth
utilization is Degraded
(utilization %)
The fault threshold
set for the degraded
state has been
exceeded.
When this fault has
been cleared, the
following message
displays: Switch port
bandwidth utilization
is Ok.
Manage Fault
Settings >
Thresholds >
Switch > Port
Utilization
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
Switch Port bandwidth
utilization is Overloaded
(utilization %)
The fault threshold
set for the overloaded
state has been
exceeded.
When this fault has
been cleared, the
following message
displays: Switch port
bandwidth utilization
is Ok.
Manage Fault
Settings >
Thresholds >
Switch > Port
Utilization
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
Table 2-4 Switch Faults (continued)
Fault Description Explanation Related Setting Recommended Action