Network Router User Manual

2-23
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 2 Fault Descriptions
AAA Server Faults
PEAP server is
not available
PEAP The PEAP server is
not available.
When this fault has
been cleared, the
following message
displays: PEAP
server is available
Manage Fault
Settings >
Thresholds > Peap >
Response Time
Check the server
configuration.
PEAP server is
Degraded
PEAP The fault threshold
set for the degraded
state has been
exceeded.
When this fault has
been cleared, the
following message
displays: PEAP
server is OK.
Manage Fault
Settings >
Thresholds >
Peap > Response
Time
Verify that the fault
threshold is set
correctly.
If the threshold is set
correctly, review your
network to determine
the action necessary
to clear the fault
condition.
PEAP server is
Overloaded
PEAP The fault threshold
set for the overloaded
state has been
exceeded.
When this fault has
been cleared, the
following message
displays: PEAP
server is OK
Manage Fault
Settings >
Thresholds > Peap >
Response Time
Verify that the fault
threshold is set
correctly.
If the threshold is set
correctly, review your
network to determine
the action necessary
to clear the fault
condition.
Radius server is
not available
PEAP The RADIUS server
is not available.
When this fault has
been cleared, the
following message
displays: Radius
server is available
Manage Fault
Settings >
Thresholds >
Radius > Response
Time
Check your server
configuration.
Table 2-3 Server Faults (continued)
Fault Description
Server
Type Explanation Related Setting Recommended Action