Network Router User Manual

2-13
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 2 Fault Descriptions
Access Point Faults
PSPF is disabled Non-IOS The PSPF port has
been disabled.
PSPF (Publicly
Secure Packet
Forwarding) is a
feature that
prevents client
devices associated
to a bridge or
access point from
inadvertently
sharing files with
other client devices
on the wireless
network.
When the fault is
cleared, the
following message
displays: The PSPF
is enabled.
Manage Fault
Settings >
Security
Policies >
PSPF Enabled
Log in to the access point
and enable the PSPF
setting.
Retry Count rate is
Degraded number per
minute
Non-IOS
and IOS
The fault threshold
set for the degraded
state has been
exceeded.
When the fault is
cleared, the
following message
displays: Retry
Count rate is OK
Manage Fault
Settings >
Thresholds >
Access Point >
Max Retry
Counts
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
Table 2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action