Regulatory Compliance and Safety Information Manual

61
Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router
78-16178-04
Site Preparation and Safety Information
Site Preparation and Safety Information
Preparing Your Site for Installation
To ensure normal system operation, plan your site configuration and prepare your site before installation.
Choosing a Site for Installation
• Install the system in a restricted access area, where access can be gained only by service personnel
through the use of a special tool, lock and key, or other means of security.
• Choose a site with a dry, clean, well-ventilated and air-conditioned area.
• Choose a site that maintains an ambient temperature of 32 to 104
o
F (0 to 40
o
C).
Ensuring Overcurrent Protection
The system relies on the protective devices in the building installation for protection against
short-circuit, overcurrent, and earth (grounding) fault. Ensure that the protective devices in the building
installation are properly rated to protect the system, and that they comply with national and local codes.
Grounding the System
• Do not defeat the ground conductor on an AC plug.
Nihon Cisco Systems PA-A3-8T1IMA D99-0385JP
Nihon Cisco Systems PA-A3-OC3MM L00-0328
Nihon Cisco Systems PA-A3-OC3SMI N98-3009-0
Nihon Cisco Systems PA-A3-OC3SML N98-3010-0
Nihon Cisco Systems PA-A3-T3 N98-N324-0
Nihon Cisco Systems PA-MC-2T3+ L99-1065
Nihon Cisco Systems PA-MC-4T1 T98-6318-0
Nihon Cisco Systems PA-MC-8T1 T98-6317-0
Nihon Cisco Systems PA-MC-8TE1+ L00-0142
Nihon Cisco Systems PA-MC-T3 N98-N325-0
Nihon Cisco Systems PA-T3 N98-N325-0
Nihon Cisco Systems PA-T3+ N98-N358-0
Nihon Cisco Systems PA-VXA-1TE1-24+ CD01-0783JP, L01-0254
Nihon Cisco Systems PA-VXA-1TE1-30+ CD01-0783JP, L01-0254
Nihon Cisco Systems PA-VXB-2TE1+ CD00-0021JP, L00-0011
Table 5 Cisco 7301 JATE Approvals for Port Adapters (continued)
Applicant Name Model Number Approval Number