Router Installation and Configuration Guide

4-2

Cisco 7201 Installation and Configuration Guide

OL-11364-04

Chapter 4 Replacing Cisco 7201 Field-Replaceable Units

Removing and Installing an SFP Module

For SFP module specifications and product numbers, see Appendix A, “Specifications.”

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into

beams or view directly with optical instruments.

Statement 1051

Warning

Class 1 laser product.

Statement 1008

Warning

Class 1 LED product.

Statement 1027

For general information about SFP modules, see the “SFP Module Information” section on page 1-5.

Removing an SFP Module

Use the following procedure to remove an SFP module:

Step 1 Make sure there is no traffic flowing through the native Gigabit Ethernet port.

Step 2 Remove the optical fiber cable, taking care not to touch the connector.

Step 3 Pull gently to detach the SFP module from the chassis.

Step 4 Insert a plug into the SFP module.

Installing an SFP Module

Use the following procedure to install an SFP module:

Figure 4-1 Inserting an SFP Module into the Cisco 7201 Gigabit Ethernet Port 0/1

1 Gigabit Ethernet port 0/1—SFP port 2 SFP module

170860

GE 0/0

GE 0/1

GE 0/2

GE 0/3

AUX

CONSOLE

MNGMNT USE ONLY

LINK

FE 0/0

RJ45

SFP

LINK/ACTV

RJ45

Cisco 7201