Router Installation and Configuration Guide

A-1
Cisco 7201 Installation and Configuration Guide
OL-11364-04
APPENDIX
A
Specifications
This appendix provides router specifications and cable assemblies and pinouts for the cables shipped
with the Cisco 7201 router, as well as power supply information and SFP module information.
For additional information on how the cables are physically connected to the devices, see, Chapter 1,
“Overview,” and Chapter 2, “Installing the Cisco 7201 Router.”
This appendix includes the following information:
• Cisco 7201 Router Specifications, page A-1
• Power Supply Product Numbers, page A-2
• Software Requirements, page A-3
• Processor and Memory Specifications, page A-3
• SFP Module Specifications and Configurations, page A-4
• Gigabit Ethernet RJ-45 Port Pinouts, page A-6
• Gigabit Ethernet Flow Control Information, page A-9
• Console Port and Auxiliary Port Signals and Pinouts, page A-10
Cisco 7201 Router Specifications
The specifications for the Cisco 7201 router are listed in Table A-1.
Ta ble A-1 Cisco 7201 Router Specifications
Description Specification
Dimensions (H x W x D) 1.73 in. x 17.3 in. x 16.2 in. (4.39 cm x 43.94 cm x 41.20 cm)
Weight Chassis fully configured with a port adapter ~ 16.5 lb (7.48 kg)
Heat dissipation 290 BTU
1
/hr at 85W typical input power
512 BTU/hr at 150W maximum input power
Temperature 32
o
to 104
o
F (0
o
to 40
o
C) operating; –4
o
to 149
o
F (–20
o
to 65
o
C) nonoperating
Humidity 10% to 90% noncondensing
Dual AC Power Supply Information
AC-input power 150W maximum
AC-input power (typical) 85W