Network Router User Manual

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 28

Setting Up and Configuring the WRVS4400N

Wireless-N Router

The Wireless-N router works right out of the box with the default settings.

However, to change these settings, you can use the router’s web-based

configuration utility.

You can access the web-based configuration utility via a web browser (such as

Microsoft Internet Explorer or Mozilla Firefox) from a computer connected to the

same network the router is connected to.

This chapter includes the following sections:

• Accessing the Web-Based Utility, page 29

• Navigating the Utility, page 30

• Setting Up Your Wireless-N Router, page 36

• Configuring Wireless Settings, page 68

• Configuring Firewall Settings, page 88

• Configuring the ProtectLink Web Service, page104

• Configuring the VPN Settings, page105

• Configuring the QoS Settings, page118

• Configuring the Administration Settings, page123

• Configuring IPS Settings, page135

• Configuring the L2 Switch Settings, page141

• Viewing Status, page152