IP Phone User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
4-44
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Table 4-22 802.1X Authentication Real-Time Status
Option Description To Change
802.1X Authentication
Status
Real-time progress of the 802.1X
authentication status, displaying one
of the following states:
• Disabled—802.1X is disabled
and transaction was not
attempted
• Disconnected—Physical link is
down or disconnected
• Connecting—Trying to discover
or acquire the authenticator
• Acquired—Authenticator
acquired, awaiting
authentication to begin
• Authenticating—Authentication
in progress
• Authenticated—Authentication
successful or implicit
authentication due to timeouts
• Held—Authentication failed,
waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.