user manual

SpecificationDescription
2790 VA @ 200 VACMaximum Input VA
2500 W (up to four power supplies)Maximum output power per power supply
35 A (sub cycle duration)Maximum inrush current
8530 BTUMaximum Heat Output
12 ms @ 2500 WMaximum hold up time
12 VDC @ 208 APower supply output voltage
3.3 VDC @ 5APower supply standby voltage
Climate Savers PlatinumEfficiency Rating
20% 50% 100%
90% 94% 91%
Efficiency (80 Plus Platinum Certified)
IEC320 C20Input connector
Table 14: DC-Input Power Supply (N20-DC-2500) Specifications
SpecificationItem
Cisco UCS Software Release 2.0(1)Minimum software requirement
–48 to –60 VDC
DC-input voltage
62 A maximum @ –48 VDC input
DC-input current
2500 WOutput power
62 ACurrent draw at min voltage
50 ACurrent draw at max voltage
2.5Maximum KVA rating
Accepts Panduit LCD4-14AF-L or equivalent
barrel-type lug terminals with 90-degree angle, two-
hole tongue, which accommodates 1/0 AWG size
copper wire. The connector tongue width is 0.82 in,
the stud hole spacing is 5/8 in, and the hole size is 1/4
in.
DC input terminal block
8 msOutput holdup time
Cisco UCS 5108 Server Chassis Installation Guide
OL-20035-05 73
Technical Specifications
Specifications for the Cisco UCS 5108 Blade Server Chassis Power Supply Units