user manual

Connectors
A console port gives a direct connection to a blade server to allow operating system installation and other
management tasks to be done directly rather than remotely. The port uses the KVM dongle device included
in the chassis accessory kit. See KVM Cable, on page 69 for more information.
Cisco UCS B440 Blade Servers
For full service and installation instructions, see the Cisco UCS B440 High Performance Blade Server
Installation and Service Note.
Figure 6: Cisco UCS B440
Right ejector thumbscrew9Hard drive bay 11
Power button and LED10Hard drive bay 22
Network link status LED11Hard drive bay 33
Blade health LED12Hard drive bay 44
Local console connection13RAID battery backup module (BBU)5
Reset button access14Left ejector thumbscrew6
Locate button and LED15Left ejector handle7
Right ejector handle8
LEDs
The LED indicators indicate whether the blade server is in active or standby mode, the status of the network
link, the over all health of the blade server, and whether the server is set to give a flashing blue beaconing
indication. See Interpreting LEDs, on page 25 for details.
The removable hard disks also have LEDs indicating hard disk access activity and hard disk health.
Cisco UCS 5108 Server Chassis Installation Guide
12 OL-20035-05
Overview
Blade Servers