USER GUIDE 24-Port 10/100 + 2‑Port Gigabit Switch + 2 MiniGBIC Model: SR224G BUSINESS SERIES
Table of Contents Chapter 1: Introduction 1 The 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2: Product Overview 3 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This User Guide About This User Guide Icon Descriptions While reading through the User Guide, you may encounter various icons designed to call attention to a specific item. Below are descriptions of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product.
Chapter 1: Introduction Chapter 1: Introduction The 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC This new Linksys rack-mount switch delivers non-blocking, wire speed switching for your 10/100 Mbps network clients, plus multiple options for connecting to your network backbone. Twenty-four 10/100 ports wire-up your workstations, while the integrated 10/100/1000 ports or miniGBIC ports connect to your servers or backbone at Gigabit speeds.
Chapter 1: Introduction Features • Ideal for integrating your 10 Mbps and 100 Mbps network hardware • 24 10/100 Ports provide dedicated bandwidth in Half or Full-Duplex modes • 2 Gigabit Ethernet ports and 2 shared miniGBIC slots for Gigabit Fiber expansion • Each port supports Auto MDI/MDI-X cable detection • Compatible with all major network operating systems • Advanced store-and-forward packet switching optimizes data transfers • Auto partitioning protects PCs from downed network lines •
Chapter 2: Product Overview Chapter 2: Product Overview Front Panel The LEDs and network ports are located on the front panel of the Switch. Front Panel LEDs System (Green) This LED lights up and remains lit when the Switch is powered on. 1-24 (Green) Each LED lights up when a connection is made through its corresponding port. It flashes when the corresponding port is active. Gigabit/miniGBIC 1-2 (Green) The Gigabit/miniGBIC LED lights up when a connection is made through the corresponding Gigabit port.
Chapter 2: Product Overview Back Panel The power port is located on the back panel of the Switch. Back Panel Power The power port is where you will connect the included power cord. Side Panel The security slot is located on the side panel of the Switch. Side Panel with Security Slot Security slot The security slot is where you can attach a lock to protect the Switch from theft. Placement Options There are two ways to physically install the Switch: • Set the Switch on its four rubber feet.
Chapter 2: Product Overview Rack-Mount To rack-mount the Switch, follow these instructions: 1 The Switch has four mounting holes on each side. Screw an included mounting bracket into each side. Attach the Brackets 2 Lift the Switch into the rack, and secure the brackets with additional screws (not included).
Chapter 3: Installation Chapter 3: Installation Overview This chapter will explain how to connect network devices to the Switch. The application diagram shown here is an example of a typical network configuration. Internet Cable/DSL Modem Wireless Access Point Router Desktop Notebook Server Application Diagram When you connect your network devices, make sure you don’t exceed the maximum cabling distance of 100 meters (328 feet).
Chapter 3: Installation Connection Instructions 1 Make sure all of the devices you will connect to the Switch are powered off. 2 Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. Connect the Ethernet Network Cable 3 Connect the other end of the Ethernet network cable to a computer or other network device. 4 Repeat steps 2 and 3 to connect additional devices.
Appendix A: Specifications Appendix A: Specifications Model SR224G Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab Ports 24 10/100 Ports, 2 10/100/1000 Ports, and 2 Shared MiniGBIC Ports Cabling Type Category 5, and Multi-Mode fiber 1310 nm, and 850 nm Supported LEDs System, 1-24, Gigabit/miniGBIC 1-2 Security Feature Security Slot Dimensions 17.01" x 1.75" x 8.20" WxHxD (432 x 44.5 x 208 mm) Unit Weight 6.17 lb (2.
Appendix B: Warranty and Regulatory Information Appendix B: Warranty and Regulatory Information Limited Warranty Linksys warrants to You that, for a period of the product’s lifetime (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys’ entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
Appendix B: Warranty and Regulatory Information This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident.
Appendix B: Warranty and Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.
Appendix B: Warranty and Regulatory Information Industry Canada Statement This device complies with Industry Canada ICES-003 rule. Operation is subject to the following two conditions: 1 This device may not cause interference and 2 This device must accept any interference, including interference that may cause undesired operation of the device. Règlement d’Industry Canada Cet appareil est conforme à la norme NMB003 d’Industrie Canada.
Appendix B: Warranty and Regulatory Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Appendix B: Warranty and Regulatory Information Ceština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unie Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené tímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává, že daný produkt musí být likvidován odděleně od běžného komunálního odpadu.
Appendix B: Warranty and Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest.
Appendix B: Warranty and Regulatory Information Français (French) - Informations environnementales pour les clients de l’Union européenne La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
Appendix B: Warranty and Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto.
Appendix B: Warranty and Regulatory Information Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met nietgescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld.
Appendix B: Warranty and Regulatory Information Português (Portuguese) - Informação ambiental para clientes da União Europeia A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares.
Appendix B: Warranty and Regulatory Information Slovenčina (Slovene) - Okoljske informacije za stranke v Evropski uniji Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme, označene s tem simbolom – na izdelku in/ali na embalaži – med običajne, nerazvrščene odpadke. Ta simbol opozarja, da je treba izdelek odvreči ločeno od preostalih gospodinjskih odpadkov.
Appendix C: Contact Information Appendix C: Contact Information Linksys Contact Information Website http://www.linksys.com E-Mail support@linksys.com FTP Site ftp.linksys.com Advice Line 800-546-5797 (LINKSYS) Support 800-326-7114 RMA (Return Merchandise Authorization) 949-823-3000 Fax 949-823-3002 NOTE: Details on warranty and RMA issues can be found in the Warranty and Regulatory Information section of this Guide.
Notes 7032710NC-RR 22 24-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC
www.linksys.
