- Cisco Smart Switch Manual

Advanced Configuration

QoS

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 36

The QoS > QoS Settings window displays the current QoS settings.

To configure the QoS settings, follow these steps.

STEP 1 Click QoS > QoS Settings.

STEP 2 Set the Queue Mode to Strict Priority or WRR.

• Strict Priority—Services the egress queues in sequential order,

transmitting all traffic in the higher priority queues before servicing lower

priority queues.

• WRR—Weighted Round-Robin shares bandwidth at the egress ports by

using scheduling weights 1, 2, 4, 8 for queues 1 through 4 respectively.

- WRR Weight—Displays the WRR weights to queues.