- Cisco Secure Access Control System 5.4 Manual

9-15

User Guide for Cisco Secure Access Control System 5.4

OL-26225-01

Chapter 9 Managing Policy Elements

Managing Policy Conditions

Creating, Duplicating, and Editing Device Port Filters

Use the Device Port Filters page to create, duplicate, and edit device port filters. To do this:

Step 1 Choose Policy Elements > Session Conditions > Network Conditions > Device Port Filters.

The Device Port Filters page appears with a list of device port filters that you have configured.

Step 2 Click Create. You can also:

• Check the check box next to the device port filter that you want to duplicate, then click Duplicate.

• Check the check box next to the device port filter that you want to edit, then click Edit.

• Click Export to save a list of device port filters in a .csv file. For more information, see Exporting

Network Conditions, page 9-9.

• Click Replace from File to perform a bulk import of device port filters from a .csv import file. For

more information, see Importing Network Conditions, page 9-8.

Step 3 Enter the values for the following fields:

• Name—Name of the device port filter.

• Description—A description of the device port filter.

Step 4 Edit the fields in any or all of the following tabs:

• IP Address—See Defining IP Address-Based Device Port Filters, page 9-15 for a description of the

fields in this tab.

• Device Name—See Defining NDG-Based Device Port Filters, page 9-17 for a description of the

fields in this tab.

• Network Device Group—See Defining NDG-Based Device Port Filters, page 9-17 for a description

of the fields in this tab.

Note To configure a filter, at a minimum, you must enter filter criteria in at least one of the three tabs.

Step 5 Click Submit to save the changes.