- Cisco Sensitive Routing User Guide

4-31
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Modifying Match Patterns
Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2 In the Match Pattern area, select a pattern by double-clicking on that pattern. Match Pattern information
similar to the following appears (Figure4-31 “Dialog Box for New Match Pattern in Active Dataset”):
Figure4-31 Dialog Box for New Match Pattern in Active Dataset
Step 3 Change the information accordingly.
Step 4 Click Modify to save the changes, or click Cancel to leave the changes.
Deleting Match Patterns
Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2 In the Match Pattern area, select a pattern. You can select more than one pattern by holding down the
Ctrl key while clicking each pattern.
Step 3 Click Delete. A Delete message appears.
Step 4 Click Yes to delete the pattern, or click No to stop the deletion.
Note Alternatively, you can delete a pattern by clicking Delete when you are in the dialog box for
modifying the pattern.