- Cisco Sensitive Routing User Guide

C H A P T E R

4-1

Cisco Carrier Sensitive Routing User Guide

CSR GUI Functionalities

This chapter describes CSR functionalities and commands, and contains the following sections:

• Activating the GUI, page 4-1

• Configuring CSR with the GUI, page 4-2

• Updating Active Datasets, page 4-12

• Updating Inactive Datasets, page 4-39

• CSR Commands, page 4-41

• Multiple GUI Operation, page 4-46

Activating the GUI

Step 1 To start the GUI, enter the following command at the system prompt:

/usr/local/csr/gui/csrgui &

The Login dialog box appears in Figure4-1 “Login Dialog Box”, as shown below:

Figure4-1 Login Dialog Box