Network Router User Manual

A-216
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
Appendix A Command Reference
Threshold Commands
notification-throttle timer
To modify the alarm threshold notification throttle timer, use the notification-throttle timer command.
To return the notification throttle timer interval to its default value, use the no form of the command.
notification-throttle timer seconds
no notification-throttle timer
Syntax Description
Defaults 5 seconds
Command Modes Threshold list configuration
Command History
Usage Guidelines Use this command to control the amount of alarm threshold notification activity that is generated on the
system.
Examples The following example shows how to set an alarm threshold list notification throttle timer to 10 seconds.
Switch# configure terminal
Switch(config)# threshold-list sonet-alarms
Switch(config-t-list)# notification-throttle timer 10
Related Commands
seconds Specifies, in seconds, the interval in which no more than one threshold
alarm notification can be generated. If more than one notification is
generated during the hold-down period, the extra notifications are delayed.
The range is 5 to 500 seconds.
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
show threshold-list Displays the contents of a threshold list.
threshold-list Groups a set of thresholds with a name. Switches from configuration mode
to threshold-list configuration mode.