Network Router User Manual

A-202
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
Appendix A Command Reference
System Management Commands
show optical wavelength mapping
To display the mapping of Cisco ONS 15530 channels to ITU grid frequencies and wavelengths, use the
show optical wavelength mapping command.
show optical wavelength mapping
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to display how the Cisco ONS 15530 channels map to the ITU G.692 grid
wavelengths. Channel 0 is the OSC. Channels 1 through 32 are the client data channels. The last two
digits of the frequency correspond to the ITU number (for example, the frequency for channel 1 is 192.1
so the ITU grid number is 21).
The frequencies ending in 0 and 5 are missing from the output because they are used as buffers between
the 4-channel bands.
Release Modification
12.1(10)EV2 This command was introduced.