Network Router User Manual

A-93
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
Appendix A Command Reference
Interface Configuration Commands
The following example shows how to display edge connection information. (See Table A-7 for field
descriptions.)
Switch# show connect edges
client/
wave wdm channel
---------- --- -----
Tran4/0/0 0/1 4
Kind Indicates the kind of cross connections. The values are:
• Provisioned
• Protection
C2TStatus Indicates the status of the signal from the client interface to the trunk
interface.The values are:
• Up
• Down
T2CliStatus Indicates the status of the signal from the trunk interface to the client
interface.The values are:
• Up
• Dormant
Table A-6 show connect Field Descriptions (continued)
Field Description
Table A-7 show connect edges Field Descriptions
Field Description
client/wave Shows the client side interface identifier.
wdm Shows the wdm interface identifier.
channel Shows the ITU wavelength number supported by this connection.