Network Router User Manual

A-38
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
Appendix A Command Reference
APS Commands
The following example shows how to display APS information for an APS group with the default group
name (the default working interface). (See Table A-1 for field descriptions.)
Switch# show aps group Wavepatch8/0/0
APS Group Wavepatch8/0/0 :
architecture.: 1+1, remote prov: 1+1
span.........: end-to-end
prot. mode...: network side splitter
direction....: prov: uni, current: uni, remote prov: uni
revertive....: no
aps state....: enabled (associated)
request timer: holddown: 5000 ms, max: 15000 ms, count 2
msg-channel..: auto (up on osc)
created......: 5 minutes
auto-failover: disabled
transmit k1k2: sf-lp, 0, 0, 1+1, uni
receive k1k2: sf-lp, 0, 0, 1+1, uni
switched chan: 0
channel ( 0): Wavepatch8/0/1 (STANDBY - UP)
: channel request: no-request
: transmit request: no-request
: receive request: no-request
channel ( 1): Wavepatch8/0/0 (ACTIVE - UP)
: channel request: no-request
: switchover count: 1
: last switchover: 1 hour, 0 minutes
The following example shows how to display APS information for a transparent interface. (See
Table A-1 for field descriptions.)
Switch# show aps interface transparent 8/0/0
APS Group blue :
architecture.: 1+1, remote prov: 1+1
span.........: end-to-end
prot. mode...: client side y-cable
direction....: prov: uni, current: uni, remote prov: uni
revertive....: no
aps state....: enabled (associated)
request timer: holddown: 5000 ms, max: 15000 ms, count 2
msg-channel..: auto (up on osc)
created......: 5 minutes
auto-failover: disabled
transmit k1k2: sf-lp, 0, 0, 1+1, uni
receive k1k2: sf-lp, 0, 0, 1+1, uni
switched chan: 0
channel ( 0): Transparent10/0/0 (STANDBY - UP)
: external request: no-request
: transmit request: no-request
: receive request: no-request
channel ( 1): Transparent8/0/0 (STANDBY - UP)
: external request: no-request
: switchover count: 0
: last switchover.: never