Network Router User Manual

A-12
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
Appendix A Command Reference
APS Commands
Examples The following example shows how to create an APS group and configure an APS protection interface:
Switch# configure terminal
Switch(config)# redundancy
Switch(config-red)# associate group denver
Switch(config-red-aps)# aps working transparent 2/0/0
Switch(config-red-aps)# aps protection transparent 4/0/0
Switch(config-red-aps)# aps enable
Related Commands Command Description
aps lockout Prevents switchover to the protection path.
aps working Configures the working interface for an APS interface pair.
aps y-cable Enables y-cable protection.
associate group Creates an APS group and enters APS configuration mode.
associate interface Associates multiple wavepatch interface pairs for APS protection.
show aps Displays APS configuration and operation information.