Network Router User Manual

A-1
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
APPENDIX A
Command Reference
This appendix describes the commands used in the Cisco ONS 15530 environment. This appendix
includes the following categories of commands:
• APS Commands, page A-1
• Debug Commands, page A-43
• Interface Configuration Commands, page A-65
• Online Diagnostics Commands, page A-114
• OSCP Commands, page A-123
• CPU Switch Module Redundancy Commands, page A-140
• SNMP Commands, page A-172
• System Management Commands, page A-187
• Threshold Commands, page A-213
• Topology Neighbor Commands, page A-227
APS Commands
APS (Automatic Protection Switching) provides protection against signal failure. Use the following
commands to configure and monitor APS operations.