Network Router User Manual

10-30
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter 10 Managing Your Cisco ONS 15530 System
Updating Functional Images
The following example shows the functional image information in the controller for the line card in
slot 2:
Switch# show hardware linecard 2
--------------------------------------------------------------------------------
Slot Number : 2/*
Controller Type : 0x1103
On-Board Description : Prototype Hampton Oscmb
Orderable Product Number: PROTO-HAMPTON-OSCMB
Board Part Number : 73-6838-04
Board Revision : 01
Serial Number : CAB0603MAJ1
Manufacturing Date : 01/24/2002
Hardware Version : 4.0
RMA Number :
RMA Failure Code :
Functional Image Version: 1.36
Function-ID : 0
--------------------------------------------------------------------------------
Slot Number : 2/0
Controller Type : 0x1107
On-Board Description : Prototype Hampton Oscdc
Orderable Product Number: PROTO-HAMPTON-OSCDC
Board Part Number : 73-7238-03
Board Revision : 03
Serial Number : CAB0602MA36
Manufacturing Date : 12/07/2001
Hardware Version : 3.1
RMA Number :
RMA Failure Code :
Functional Image Version: 0.52
Function-ID : 0
Transceiver type : Non-pluggable Transceiver
--------------------------------------------------------------------------------
Slot Number : 2/1
Controller Type : 0x1107
On-Board Description : Prototype Hampton Oscdc
Orderable Product Number: PROTO-HAMPTON-OSCDC
Board Part Number : 73-7238-03
Board Revision : 03
Serial Number : CAB0602MA3H
Manufacturing Date : 12/07/2001
Hardware Version : 3.1
RMA Number :
RMA Failure Code :
Functional Image Version: 0.52
Function-ID : 0
Transceiver type : Non-pluggable Transceiver
Copying a Module Functional Image from a TFTP Server to Flash Memory
To download a module functional image from a TFTP server, perform the following steps:
Command Purpose
Step 1
Switch# show {bootflash: | disk0:} Verifies that space is available in Flash memory
on the active CPU switch module. If space is
available, continue to Step 3.
Step 2
Switch# delete {bootflash: | disk0:}filename (Optional) Deletes a file from Flash memory.