Network Router User Manual

10-29
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter 10 Managing Your Cisco ONS 15530 System
Updating Functional Images
Updating Module Functional Images
You can update the functional image for the OSC modules.
Update a module functional image in three steps:
Step 1 Determine the module functional image version.
Step 2 Copy the image to Flash memory (bootflash or disk0).
Step 3 Load the image from Flash memory to the hardware controller.
Determining the Module Functional Image Version
To determine the functional image version in a module hardware controller, use the following command
in privileged EXEC mode:
Command Purpose
show hardware linecard slot Displays the functional image information.