Network Router User Manual

10-25
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter 10 Managing Your Cisco ONS 15530 System
Updating Functional Images
Example
The following example shows how to download a ROMMON image from an FTP server and update the
ROMMON image on the active CPU switch module:
Switch# show disk0:
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image 1BD2EA73 2A7B24 26 2652836 Feb 11 2002 18:07:41 ons15530-i-mz
2 .. config 36DC62E3 2AAC54 14 12461 Feb 11 2002 18:10:34 running-config
17912748 bytes available (2665556 bytes used)
Switch# copy ftp://myuser:mypass@theserver/tftpboot/ONS15530_RM.srec
disk0:ONS15530_RM.srec
Accessing ftp://theserver/tftpboot/ONS15530_RM.srec...Translating "theserver"...domain
server (192.168.2.132) [OK]
Loading ONS15530_RM.srec from 192.168.2.132 (via Ethernet3/0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 623492/17912748 bytes]
623492 bytes copied
Updating Line Card Functional Images
You can udpate the functional image for the following line cards:
• Transponder line cards
• ESCON multiplexing line cards
• 10-Gbps ITU trunk cards
• 10-GE uplink cards
• Carrier motherboards
Update a line card functional image in three steps:
Step 1 Determine the line card functional image version.
Step 2 Copy the image to Flash memory (bootflash or disk0).
Step 3 Load the image from Flash memory to the hardware controller.
Determining the Line Card Functional Image Version
To determine the functional image version in a line card hardware controller, use the following command
in privileged EXEC mode:
Command Purpose
show hardware linecard slot Displays the functional image information.