Network Router User Manual

5-7
Installation Guide for Cisco Network Planning Solution
78-17023-01
Chapter 5 Adding and Upgrading Licenses
License Operations
Note If a license that is represented by a “white page” icon, then that license is currently in use. If you
want to deregister a license that is currently in use, you must shut down the application that is
using that license.
Step 4 Click Deregister License on the right side of the License Manager window.
Step 5 When prompted to select the transaction method, click Express. This method is easiest and fastest.
Step 6 When the Authentication window appears, enter your Username, Password, and Group ID in the
appropriate fields.
Step 7 If the computer uses a proxy server, click Specify Proxy; when the Specify proxy server information
window appears, fill in the requested information and click OK.
Step 8 Click OK in the Authentication window.
• A progress window might appear while the license is deregistered from your computer.
• A window should then appear to indicate that the operation succeeded.
Deregistering a License (Browser Method)
Before using the Browser method, try the Express method. With the Express method, there is no need to
exchange codes and you can add many licenses to your computer in one operation. Use this procedure
if the Express method fails or you prefer to use the Browser method.
Note If you still cannot deregister your licenses using this method, see the “Technical Support for Licensing
Operations” section on page 5-8.
Deregistering a Component License (Browser Method)
Step 1 Start the License Manager: Go to the Windows Start menu and choose Start > Programs >
Cisco Network Planning Solution 1.0 > License Manager.
Step 2 License Manager: Expand the appropriate license file by clicking on the + sign next to the License file
folder icon. Make sure the license you want to deregister is available (green).
Step 3 License Manager: Select the license you want to deregister by clicking on it. To select one license, click
on it. To select multiple licenses, control-click or drag on the licenses.
Note If a license that is represented by a “white page” icon, then that license is currently in use. If you
want to deregister a license that is currently in use, you must shut down the application that using
that license.
Step 4 License Manager: Click Deregister License.
Step 5 License Manager: When prompted, click on the Browser button.
Step 6 The License Manager launches your Web browser and points it to the OPNET Quick Support Page for
Cisco Solutions. If your browser fails to launch, start it manually and navigate to the following URL:
http://www.opnet.com/support/cisco_qsp.html