Network Router User Manual

30 Cisco IOS for S/390 Release 2.0 Release Notes
Installing Cisco IOS for S/390 Release 2.0
— If you are using JES3, add the following statement:
//*MAIN LINES=(999,W)
— Verify that the tape unit is correct. It is hardcoded as CART.
Submit SMPECUMT.
SMPECUMT will generate the following message:
GIM34701E: SMPE expected to find ++MCS
This is expected and normal.
View the SDSF job output log to verify accuracy of the job. Execute the ISPF Browse or SDSF
View command F ‘APPLY PROCESSING WAS SUCCESS’ ALL. Confirm that the number
of occurrences matches the number of PTFs you applied.
8 Web Site PTFs
If you require additional PTFs that are not on the CUM tape received with your installation
package, access the following web site for a list of PTF numbers available:
http://www.interlink.com/support/
Scroll down approximately two pages and select the hypertext /pub directory.
Select the ptf520 directory.
Note Sometimes the incorrect year appears in the PTF creation dates. This is a known bug with
the Microsoft Internet Explorer and has no effect on the validity of the PTFs. When using
Microsoft Internet Explorer to access a PTF directory, the year in the date adjacent to a file is
displayed as the current year if the file has not been updated for six months, even though the file
might have been created in the previous year.
Create a data set to contain the PTFs you will select. we recommend you use the same naming
convention you used in the TCPNAMES High Level Qualifiers (HLQ) for your LNKINDX
variable.
When you know the PTF numbers you want from the web site, set up a batch job with multiple
GET commands using the specific PTF numbers and FTP to the Interlink anonymous FTP site.
For User ID, use anonymous; for password, use guest.
open ftp.interlink.com
anonymous
guest
bin
cd /pub/ptf520
get TPnnnnn.BIN ‘your_data_set_name( TPnnnnn ) ’
bye
Customization
This section describes the members that can be customized.