Network Router User Manual

20 Cisco IOS for S/390 Release 2.0 Release Notes
Documentation
C24Cxxxx (0Exx) T012TOPT
This table replaces Table 67 “X’C24C’ Instance Codes” in the “API Diagnostic Codes” chapter:
C2450002 0702 Recursive error
C2450003 0703 Error copying TPL to secondary
C2450004 0704 Error copying exit codes to TPL
C2450005 0705 VTPL abend
C2450020 0720 SAW not obtained
C2450021 0721 ASCB validation failed
C2450022 0722 TCB address is negative
C2450023 0723 31-bit TCB address passed
C2450024 0724 Close-pass:Close-pass pending
C2450025 0725 Close-pass:Accept pending
C2450026 0726 Close-pass:Receive pending
C2450027 0727 Close-pass:Send pending
C2450028 0728 Close-pass:Select pending
C2450029 0729 Close-pass:MBUFs awaiting send
C245002A 072A Close-pass:UDP/RAW send pending
C245002B 072B Close-pass:Shutdown pending
C245002C 072C Close-pass:Open-old retracted
C245002D 072D Close-pass:Close Pending
C245002E 072E Open-old:Authorization failed
C245002F 072F SEPM state NULL after suspend/callback
C2450030 0730 SEPM state DEAD after suspend/callback
C2450031 0731 Open-old:Failed by close-delete
C2450032 0732 TCP is terminating:SSIT is unavailable
C2450033 0733 TCP is terminating:SAVT is unavailable
C2450034 0734 TCP is terminating:SAVX is unavailable
C2450035 0735 TCP is terminating:SAVXLTCH is unavailable
C2450036 0736 Close-delete already in progress
Table 7 X’C24C’ Instance Codes
4-byte code 2-byte code Description
C24C0001 0E01 Unexpected abend
C24C0002 0E02 Recursive error
C24C0003 0E03 Error copying TPL to secondary
C24C0004 0E04 Error copying exit codes to TPL
C24C0005 0E05 VTPL abend
C24C0006 0E06 Error during rollback
Table 6 X’C245’ Instance Codes (continued)
4-byte code 2-byte code Description