user manual

Table 10: Device Notification Types
DescriptionNotification Type Keyword
Generates Border Gateway Protocol (BGP) state change traps. This
option is only available when the IP services feature set is enabled.
bgp
Generates STP bridge MIB traps.bridge
Generates a trap when the cluster configuration changes.cluster
Generates a trap for SNMP configuration changes.config
Generates a trap for SNMP copy configuration changes.copy-config
Allow CPU-related traps.cpu threshold
Generates a trap for SNMP entity changes.entity
Generates environmental monitor traps. You can enable any or all
of these environmental traps: fan, shutdown, status, supply,
temperature.
envmon
Generates SNMP FLASH notifications. In a switch stack, you can
optionally enable notification for flash insertion or removal, which
would cause a trap to be issued whenever a switch in the stack is
removed or inserted (physical removal, power cycle, or reload).
flash
Generates entity field-replaceable unit (FRU) control traps. In the
switch stack, this trap refers to the insertion or removal of a switch
in the stack.
fru-ctrl
Generates a trap for Hot Standby Router Protocol (HSRP) changes.hsrp
Generates a trap for IP multicast routing changes.ipmulticast
Generates a trap for MAC address notifications.mac-notification
Generates a trap for Multicast Source Discovery Protocol (MSDP)
changes.
msdp
Generates a trap for Open Shortest Path First (OSPF) changes. You
can enable any or all of these traps: Cisco specific, errors, link-state
advertisement, rate limit, retransmit, and state changes.
ospf
Generates a trap for Protocol-Independent Multicast (PIM) changes.
You can enable any or all of these traps: invalid PIM messages,
neighbor changes, and rendezvous point (RP)-mapping changes.
pim
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
56 OL-29044-01
Configuring Simple Network Management Protocol
Configuring SNMP Notifications