user manual

CHAPTER 4
Configuring Simple Network Management
Protocol
This chapter describes the Simple Network Management Protocol (SNMP) configuration.
•
Finding Feature Information, page 43
•
Prerequisites for SNMP, page 43
•
Restrictions for SNMP, page 46
•
Information About SNMP, page 46
•
How to Configure SNMP, page 50
•
Monitoring SNMP Status, page 62
•
SNMP Examples, page 63
•
Feature History and Information for Simple Network Management Protocol, page 64
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for SNMP
Supported SNMP Versions
This software release supports the following SNMP versions:
• SNMPv1—The Simple Network Management Protocol, a Full Internet Standard, defined in RFC 1157.
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29044-01 43