- Cisco Grid Module for CGR 1000 Series

25
Cisco Connected Grid Modules for CGR 1000 Series—WiMAX Installation and Configuration Guide
OL-26236-03
Troubleshooting and Diagnostics
snmpOID : 0.0.0.0.0.0.0.0
Power Consump : -189
RMA Code : 0-0-0-0
CLEI Code : TESTING123
VID : V01
Linecard Module specific block:
Block Signature : 0x6003
Block Version : 2
Block Length : 103
Block Checksum : 0x854
Feature Bits : 0x0
HW Changes Bits : 0x0
Card Index : 30004
MAC Addresses : 00-00-00-00-00-00
Number of MACs : 12
Number of EOBC links : 1
Number of EPLD : 16
EPLD A : 0x0
EPLD B : 0x0
EPLD C : 0x0
EPLD D : 0x0
EPLD E : 0x0
EPLD F : 0x0
EPLD G : 0x0
EPLD H : 0x0
EPLD I : 0x0
EPLD J : 0x0
EPLD K : 0x0
EPLD L : 0x0
EPLD M : 0x0
EPLD N : 0x0
EPLD O : 0x0
EPLD P : 0x0
Port Type-Num : 11-1
SRAM size : 0
Sensor #1 : 73,60
Sensor #2 : 69,55
Sensor #3 : 77,65
Sensor #4 : 71,60
Sensor #5 : 65,50
Sensor #6 : -128,-128
Sensor #7 : -128,-128
Sensor #8 : -128,-128
Max Connector Power: 1200
Cooling Requirement: 70
Ambient Temperature: 55
...
Converting Hexadecimal ESN to Decimal Notation
If your network provider requests the 11-digit decimal equivalent of your Electronic Serial Number
(ESN), you must retrieve your ESN, then convert it to decimal notation. See also, Retrieving the
Electronic Serial Number, page 24.
To convert the ESN number from hexadecimal notation to decimal notation:
Step 1 Start with the 8-digit HEX ESN # obtained from the label or using CLI, for example 0x603C9854. This
number consists of two parts:
• 0x60—Serial number