user manual

CHAPTER 3
Configuring VLANs
•
Finding Feature Information, page 39
•
Prerequisites for VLANs, page 39
•
Restrictions for VLANs, page 40
•
Information About VLANs, page 40
•
How to Configure VLANs, page 47
•
Monitoring VLANs, page 56
•
Configuration Examples, page 57
•
Where to Go Next, page 58
•
Additional References, page 58
•
Feature History and Information for VLAN, page 59
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for VLANs
The following are prerequisites and considerations for configuring VLANs:
•
The switch supports 1005 VLANs when running the IP Lite image.
•
The switch supports 256 SVIs when running the IP Lite image.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 39