user manual

VLANDB Yes 00d0.00b8.1400=00d0.00b8.1400 1 stp7
Do you want to continue (y/n) [n]? y
Related Topics
Configuring a VTP Version 3 Primary Server, on page 27
Example: Configuring VTP on a Per-Port Basis
This example shows how to configure VTP on a per-port basis:
Switch(config)# interface gigabitethernet 1/0/1
Switch(config-if)# vtp
Switch(config-if)# end
Related Topics
Configuring VTP on a Per-Port Basis, on page 31
Where to Go Next
After configuring VTP, you can configure the following:
•
VLANs
•
VLAN trunking
•
Private VLANs
•
VLAN Membership Policy Server (VMPS)
•
Tunneling
•
Voice VLANs
Additional References
Related Documents
Document TitleRelated Topic
Catalyst 2960-XR Switch VLAN Management
Command Reference
For complete syntax and usage information for the
commands used in this chapter.
Standards and RFCs
TitleStandard/RFC
——
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
36 OL-29440-01
Configuring VTP
Example: Configuring VTP on a Per-Port Basis