user manual

CHAPTER 7
Configuring IEEE 802.1Q and Layer 2 Protocol
Tunneling
•
Finding Feature Information, page 121
•
Prerequisites for Configuring Tunneling, page 121
•
Information about Tunneling, page 124
•
How to Configure Tunneling, page 133
•
Configuration Examples for IEEE 802.1Q and Layer 2 Protocol Tunneling, page 143
•
Monitoring Tunneling Status, page 146
•
Where to Go Next, page 147
•
Additional References, page 147
•
Feature History and Information for Tunneling, page 148
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Configuring Tunneling
The following sections list prerequisites and considerations for configuring IEEE 802.1Q and Layer 2 protocol
tunneling.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 121