user manual

PurposeCommand or Action
Configures the port as eligible for dynamic VLAN
membership.
switchport access vlan dynamic
Example:
Switch(config-if)# switchport access vlan dynamic
Step 4
The dynamic-access port must be connected to an end
station.
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 5
Verifies your entries in the Operational Mode field of
the display.
show interfaces interface-id switchport
Example:
Switch# show interfaces gigabitethernet 1/0/1
Step 6
switchport
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 7
Related Topics
Dynamic VLAN Assignments, on page 108
Example: VMPS Configuration, on page 117
Dynamic-Access Port VLAN Membership, on page 109
Example: VMPS Configuration, on page 117
Reconfirming VLAN Memberships
This task confirms the dynamic-access port VLAN membership assignments that the switch has received from
the VMPS.
SUMMARY STEPS
1.
vmps reconfirm
2.
show vmps
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 113
Configuring VMPS
Reconfirming VLAN Memberships