user manual

CHAPTER 6
Configuring VMPS
•
Finding Feature Information, page 107
•
Prerequisites for VMPS, page 107
•
Restrictions for VMPS, page 108
•
Information About VMPS, page 108
•
How to Configure VMPS, page 110
•
Monitoring the VMPS, page 117
•
Configuration Example for VMPS, page 117
•
Where to Go Next, page 118
•
Additional References, page 119
•
Feature History and Information for VMPS, page 120
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for VMPS
•
You should configure the VMPS before you configure ports as dynamic-access ports.
•
When you configure a port as a dynamic-access port, the spanning-tree Port Fast feature is automatically
enabled for that port. The Port Fast mode accelerates the process of bringing the port into the forwarding
state.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 107