user manual

Example: Monitoring Private VLANs
This example shows output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
10 501 isolated Gi2/0/1, Gi3/0/1, Gi3/0/2
10 502 community Gi2/0/11, Gi3/0/1, Gi3/0/4
10 503 non-operational
Where to Go Next
You can configure the following:
•
VTP
•
VLANs
•
VLAN trunking
•
VLAN Membership Policy Server (VMPS)
•
Tunneling
•
Voice VLANs
Additional References
Related Documents
Document TitleRelated Topic
Catalyst 2960-XR Switch VLAN Management
Command Reference
For complete syntax and usage information for the
commands used in this chapter.
Standards and RFCs
TitleStandard/RFC
——
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
104 OL-29440-01
Configuring Private VLANs
Example: Monitoring Private VLANs