user manual

3
Configure interfaces to be isolated or community host ports, and assign VLAN membership to the host
port.
4
Configure interfaces as promiscuous ports, and map the promiscuous ports to the primary-secondary
VLAN pair.
5
If inter-VLAN routing will be used, configure the primary SVI, and map the secondary VLANs to the
primary.
6
Verify the private VLAN configuration.
Default Private VLAN Configuration
No private VLANs are configured.
How to Configure Private VLANs
Configuring and Associating VLANs in a Private VLAN
The private-vlan commands do not take effect until you exit VLAN configuration mode.
SUMMARY STEPS
1.
configure terminal
2.
vtp mode transparent
3.
vlan vlan-id
4.
private-vlan primary
5.
exit
6.
vlan vlan-id
7.
private-vlan isolated
8.
exit
9.
vlan vlan-id
10.
private-vlan community
11.
exit
12.
vlan vlan-id
13.
private-vlan association [add | remove] secondary_vlan_list
14.
end
15.
show vlan private-vlan [type] or show interfaces status
16.
copy running-config startup config
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 93
Configuring Private VLANs
Default Private VLAN Configuration